Product code: 100BOK_160
Liftable metal bed frame 100x160 SIDE-OPENING 19 slats for a children's bed
Shipping costs are not included in the price.
Shipping costs are not included in the price.
Ask about the product
Administratorem danych osobowych jest KAVON Przemysław Nowak. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Delivery time varies by destination country (2–5 business days).
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Description
Technical data
Delivery costs
Children's bed frame 100x160 — side-opening
The 100x160 size offers comfort close to a youth bed while keeping the shorter length — the choice of parents who want the bed to serve as long as possible. Our metal liftable frame 100x160 turns the space under the mattress into roomy storage, while the steel frame takes loads that no wooden construction will survive — including when the bed is used for jumping.
The side-opening mechanism lets you place the bed with its shorter side against the wall and lift the frame from the room side — the layout that saves narrow children's rooms.
Why steel and not wood
- closed 40x30 mm profile with a 1.5 mm wall — no sagging and no squeaking after years of use
- powder coating in textured black — resistant to scratches and the marks of play
- bolted corners on steel connectors of our own design — the joint can be retightened at any time and the frame taken apart when you move house
- 19 sprung birch plywood slats, 53 x 8 mm, spaced approx. 2.5 cm apart — even mattress support
Specification
| Frame dimensions | 990 x 1604 mm |
| Profile | 40x30 mm, 1.5 mm wall |
| Slats | 19 pcs., birch plywood 53 x 8 mm, spacing approx. 2.5 cm |
| Finish | powder coating, textured black, frame for self-assembly |
Please note — a different lifting mechanism
This frame uses a different mechanism from the foot-end opening version. The mechanism is fitted at a slight angle — one hole sits lower. The hole positions are shown below and in the downloadable instructions above the description.
Before drilling, please compare the hole spacing with the drawing. Mounting the mechanism horizontally will prevent the frame from opening correctly.
An example of how to fit the mechanisms in a bed box 40 cm high:
Opening handle — fitted by you
Side-opening frames in non-standard lengths — 160, 190, 210 and 220 cm — use a different opening handle. There is no cord factory-fitted inside the profile here.
We include the cord in the set. It has to be put onto the side profile before the frame is bolted together, in a spot of your choosing — once the frame is assembled this can no longer be done without taking it apart again.
What to prepare before assembly
The frame is fitted inside a bed box, which is not included. The minimum internal dimension is 1010 x 1623 mm, with a box height of at least 30 cm. The mounting height of the mechanism is chosen to match the thickness of the mattress. Fit the gas struts with the thicker part facing upwards.
Corner supports — an absolute requirement. Each of the four corners of the box must have a support for the closed frame to rest on. We also recommend a reinforcement in the middle of the furniture. Without supports, the entire load is carried by the bolted corners of the frame and by the lifting mechanisms, which leads to them wearing out or being damaged.
Gas springs. The set includes matched 250N gas struts. At this size and with this way of opening, stronger ones are not needed — too much force makes the frame spring upwards.
Frequently asked questions
What age of child is the 100x160 size suitable for?
A bed 160 cm long usually serves from the age of 3 to 10. After that, it is worth moving on to the 90x200 or 100x200 size, which we make in the same construction.
Is the bed box included in the set?
No. The frame is fitted inside a box built by you or bought separately. The minimum internal dimension is 1010 x 1623 mm with a height from 30 cm.
Will the frame stand up to jumping on the bed?
Children jump on beds and no instruction manual will change that — which is why it is worth knowing what really decides whether the bed can take it.
The frame itself is built for it. A steel 40x30 mm profile with a 1.5 mm wall handles dynamic loads incomparably better than wood, which dries out over time and starts to work loose at the joints. But there are two things the person building the bed has to get right, and the durability of the whole depends on them.
1. Supports in every corner of the box
This matters most. The closed frame must rest on the four corners of the box — on battens, blocks or shelves screwed to the sides. If the frame hangs on the lifting mechanisms alone, every jump transfers the full impact to the bolted corners of the frame and to the mechanisms themselves. The result is loosened or worn corners and, in extreme cases, a bent mechanism. With supports in place, the force goes straight into the box and the construction does not feel it at all.
2. The right mattress
With a thin mattress, the whole force of the jump strikes one or two slats at a single point — and those can simply snap. Not because they are weak, but because nothing spread the pressure. A good mattress of the right thickness cushions the impact and distributes it across many slats at once, that is across the whole surface of the frame. It is the same principle as walking on snow in boots versus on skis.
In short: the frame will take it. Provide four corner supports in the box and a decent mattress, and the bed will last through the whole of childhood.
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
