Product code: A4D1-100210
Lift-up metal bed frame 100x210 SIDE-OPENING 24 slats
Wybierz wariant produktu:
Individual variants may differ in price
Ask about the product
Administratorem danych osobowych jest KAVON Przemysław Nowak. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Delivery time varies by destination country (2–5 business days).
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Description
Technical data
Delivery costs
Bed frame 100x210 SIDE-OPENING with 24 slats
Made of a thick profile measuring 40x30mm, the frame is extremely solid and resistant to damage. The mechanisms, produced for years in a Polish factory, guarantee reliability and convenience of use.
Product made to individual order - non-returnable.
For side-opening frames with non-standard lengths (190cm, 210cm, and 220cm), the opening handle is changed. There is no permanent cord pre-mounted in the profile. We include a cord in the set, which should be attached to the side profile independently before assembling the frame in the correct position.
Technical data:
Frame width: 990mm
Frame length: 2104mm
Slats: 24 spring slats - birch
Distance between slats: about 2.5cm
Mechanism dimensions: technical drawings of the lifting mechanism in the product image gallery
Packaging: each frame is packed in a separate carton measuring approximately 210x30x13cm
Assembly: the frame is for self-assembly, please remember to mount the actuators with the THICKER part facing upwards
Box for self-construction (not included):
Internal dimensions of the box (recommended clearance on length): 100 x 212cm
Box height: minimum 20cm
Mounting in the box: each customer must individually choose the height at which the mechanisms will be mounted; it all depends on the thickness of the mattress and individual needs
IF YOU HAVE NO IDEA HOW TO MAKE A BED BOX OR IF YOU HAVE ANY DOUBTS, WE ENCOURAGE YOU TO READ OUR ARTICLE:
>>>How to design a box for a metal frame with an ST mechanism?<<<
Selection of gas springs:
Everything depends on the thickness and weight of the mattress that will eventually be on the frame. We would like to point out that a stronger actuator is not always "better". In the case of side opening, we recommend 350N. In case of doubt, please contact us by email or telephone to help you choose the actuator - its weight must be known.
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
